Hyperterminal private edition 6.3 windows 10

#Hyperterminal private edition 6.3 windows 10 how to
#Hyperterminal private edition 6.3 windows 10 serial

From the Settings drop-down menu select вЂњMessagesвЂ¦вЂќ The following window will appear. Now we move on to the final step in configuring this WXT520, the Message Settings. The main things to change here are the PTU вЂњTemperature UnitвЂќ and the вЂњBarometric pressure unitвЂќ. Check that the settings are as they are shown here:ДЇigure 4: WXT520 sensor settings. From the Settings drop-down menu select вЂњSensorsвЂ¦вЂќ You will get the following window. We now configure the Wind, PTU and Precipitation sensors within the WXT520. Also note that we check вЂњComposite message auto transmissionвЂќ so the composite message will automatically be output but the individual Wind, PTU and Precipitation will not. This is so that Wind, PTU and Precipitation data donвЂ™t come through unless the WXT520 is queried for them. Note that we have checked the вЂњQuery OnlyвЂќ box in the Communication Protocol section. Be sure to select вЂњNMEA v3.0вЂќ and check the вЂњQuery OnlyвЂќ and the вЂњUse XDR for wind messageвЂќ. The next key setting in this window is the вЂњCommunication protocolвЂќ. Set the interval to what you need it to be. The key settings in this window are the вЂњComposite Message auto transmissionвЂќ checkbox and the вЂњAuto Composite intervalвЂќ. Now that the Vaisala Configuration Tool is communicating with the WXT520 we can start setting it up to output the XDR NMEA v3.0 0189 message.ДЇrom the Settings drop-down menu select вЂњDeviceвЂ¦вЂќ The following window will appear check that the settings are as they are shown here:ДЇigure 3: The Device Configuration window for the WXT520. The circled values are read automatically from the WXT520 if it is set up to output Wind, PTU and Precipitation. In the main window you should now see some values being read by the Configuration Tool from WXT520.ДЇigure 2: Main window of the Vaisala Configuration Tool. The following window will appear:ДЇigure 1: COM port settings for communicating with a WXT520 using the Vaisala Configuration Tool.Д¬onfirm the settings above and click OK. If you donвЂ™t see any readings coming in, you will have to go into Configuration Setup via File в†’ Configuration Setup. 2.01 r.9 it can be downloaded atД¬onnect the WXT520 to a Windows computer and start up the Configuration Tool. The latest version at the time of writing this is Ver. One way to configure the WXT520 is using the Vaisala Configuration Tool. The reason we choose an XDR NMEA v3.0 0183 message is because this is the only type of met message the Ashtech MircoZ can receive.

#Hyperterminal private edition 6.3 windows 10 how to

We first describe how to configure the WXT520 to output a single XDR NMEA v3.0 0183 message containing the following values: Pressure, Temperature, Humidity, Wind Speed, Wind Direction, Rain Accumulation & Hail Accumulation. Vaisala Configuration Tool Version 2.01 r.

6.3 by Hilgraeve Monroe, Michigan USA was used for this test)

#Hyperterminal private edition 6.3 windows 10 serial

Vaisala WXT520 cable with DB9 serial connector Integrating the Vaisala WXT520 with the Ashtech MicroZ Vaisala - How to integrate the Vaisala WXT520 with the Ashtech MicroZ - Print View Vaisala - How to integrate the Vaisala WXT520 with the Ashtech MicroZ